Ask Experts Questions for FREE Help !
Ask
    ross6373's Avatar
    ross6373 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 24, 2009, 08:05 PM
    Ruud 10 seer A/C unit not working 10y/o
    Ruud 10 seer ac new wire, new capasitor, new fan motor, Hard start kit on unit , & new thermastat The unit starts and runs for about 5 minutes the fan motor stops the compressor kicks on and runs then when the fan stops running it is dead. Help This unit is about 10 years old. Why will it not run??
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jun 25, 2009, 03:13 AM
    More than likely something is wired wrong. Look for a wiring diagram on the access door of the outside unit.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

13 seer AC unit with 10 Seer Coil is this possible? [ 3 Answers ]

I am currently in the process of getting quotes on a new AC Unit. I am looking at a 2.5 ton, 13/14 seer unit. When talking to the guys who do the quotes I have gotten mixed answers on a couple things. My unit is 18 years old and the motor broke. 1. If I get a new AC unit for the outside that...

Replace RUUD Air Handler 10 Seer [ 4 Answers ]

I have a six year old Ruud Heat Pump (10 seer) with an air handler in the attic. The compressor on the heat pump failed and I had it replaced. The space was still not being cooled. I suspect that the coil in the air handler is clogged. It will cost $300 to clean and is not a guaranteed fix. ...

Ruud heating unit [ 2 Answers ]

How do I light the pilot

Where is seer rating located on unit? [ 1 Answers ]

Can anyone tell me where to find the seer rating on an A/C unit? The unit I have is a Goodman #CPKE30-18. Thanks for your help.

AC unit replacement 13 vs 15 SEER [ 1 Answers ]

My 14 yr old 2.5 ton 10 SEER Trane unit must be replaced. I have two story townhouse in the southeast with approx 1450 sqft. Is the ductwork current enough to accommodate 15 SEER unit with variable speeds or is 13 SEER unit better? Should I get ducts cleaned out? Do I hire professional to...

View more questions Search