 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Most likely you have some trash clogging the hot water inlet ports of the cartridge.
The solution would be to shut the water off, open up the valve and check and clean the inlet ports. Before you reassemble, turn the hot water back on to flush out the supply. Reassemble and test. Good luck. Tom |
||||
Not your question?
Ask your question
View similar questions
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
New hot water heater installed, but no hot water pressure. Plenty of cold water?
[ 11 Answers ]
Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....
Cold water pressure is lower than Hotwater pressure
[ 1 Answers ]
In the bathroom sink, I see the hotwater pressure is very good . When I open the cold water it is very low. It is was fine 2 weeks ago. What could be the problem? Thanks Asaad
Low water pressure causing high blood pressure
[ 1 Answers ]
I have low or no hot water pressure to the downstairs bathroom. I've replaced the cartridges, valves and hot water heater, still no pressure... help.
View more questions Search
|
