Ask Experts Questions for FREE Help !
Ask
    lodgey37's Avatar
    lodgey37 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 17, 2009, 05:16 PM
    My shower only runs cold water
    I put the taps on under neath bath but the hot was on cold tap and visa versa. I could.nt put them on any other way as the taps would have been facing outside the bath underneath. I then put yhe shower head onto yhe wall in side the shower running off new taps but it only runs the cold
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jun 18, 2009, 06:04 AM
    We need more information. Is your valve one handle or two knobs? What's the brand name? Are you saying the hot and cold are reversed? Let me know, tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Low pressure in shower both hot and cold side. New hot water heater, new shower, [ 2 Answers ]

I have no water pressure in my new shower. I have a new hot water heater, new shower fixture, new plumbing. Please tell me what the problem is.

Upstairs Bathroom Sink - Cold water tab runs very warm for first 30 seconds. [ 14 Answers ]

I do not know much about plumbing. I live in the USA. I have a 60 gallon gas water heater. My problem started maybe a month or two ago. In the bathroom sink of my home's second story the cold water in the sink will run very warm (almost hot) for the first 30 seconds. After that it goes back to...

Shower water runs up into second bathroom tub [ 3 Answers ]

Each time someone showers in the master bathroom, the water comes up in the second bathroom tub. And, it goes the other way around too. With the water, comes dirt and leaves, which appear to be coming from outside. I have used a plunger, but the water remains in the tub. Now, both tubs are filled...

View more questions Search