Ask Experts Questions for FREE Help !
Ask
    Gascon4606's Avatar
    Gascon4606 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 17, 2009, 11:19 AM
    Activate self closing door hinge
    I have a door with 2 IMP self closing hinges on it but the door didn't come with them activated on it and I can't figure out how to get it I have the tools I just can't figure it out

    Thanks
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Jun 18, 2009, 04:49 AM

    Can u post picture of hinge?

    Chuck
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #3

    Jun 20, 2009, 06:14 PM

    Insert the correct size allen wrench in the top of the hinge barrel and turn counter clockwise to increase spring tension. Press down and allow wrench to turn clockwise to release tension.
    icicicles's Avatar
    icicicles Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Nov 26, 2012, 03:11 PM
    Who do I remove the pins to remove the door on these IBP self closing hinges?
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #5

    Nov 26, 2012, 08:27 PM
    Pins are not removable. Have to take screws out of the jamb or the door.

    Chuck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Adjusting tension in a door hinge. [ 1 Answers ]

How do you adjust the tension in the door hinges on the door going from the house into the garage?

GE Electric Slide In Oven Door Hinge repair or replace [ 1 Answers ]

My oven door hinge is not functioning properly. When I open it the hinge does not open all the way and pulls on the door. Do I need to replace he hinge. You can see the metal pull on the door panel. The oven is 14 years old. Is is worth replacing the hinge or should we think about replacing...

Reset door hinge tension? [ 2 Answers ]

I have recently moved into my home and discovered the door going into the garage has self closing hinges. I need to know the procedure of how to reset the tension allowing the hinges to close the door?

Door hinge rotten wood area [ 2 Answers ]

My door hinge that attached to the jamb will take a screw, because the wood has Rotted in the jamb. I know I could relocate the hinge to another part of the door. I would have to mortise. Another option is to fill in the decaying wood with wood Dough so the screw would have a better...

Removing a self closing door hinge [ 2 Answers ]

I want to temporarily remove a self-closing door hinge (to install a dog door). Is there an easy way to do this without removing one half of the hinge from the door or jam (like removing the pins on standard hinges)? There are a couple of allen screws in the unit (one on top, one on the bottom of...

View more questions Search