Ask Experts Questions for FREE Help !
Ask
    KRISTAR's Avatar
    KRISTAR Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 16, 2009, 04:10 PM
    Th230B thermostat
    Can someone help me to program the time on the clock, we had time change and I can't find the manual to fix it
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jun 16, 2009, 07:45 PM
    When time changes back, you`ll have the same problem all over again
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #3

    Jun 16, 2009, 10:08 PM
    Th230B is not a valid product number or phrase, please check the request and re-enter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changed over from White Rodgers Thermostat to Honeywell thermostat [ 3 Answers ]

I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I have changed over to a Honeywell programmable thermostat model RTH7400. Did all the correct wiring as stated in the books but when set to cool, the heater kicks on instead of the central air conditioning. What...

Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat. [ 4 Answers ]

I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...

Replace Brant standard thermostat with HOneywell thermostat [ 40 Answers ]

HI guys, I have a Bryant Heat Pump system with axilaury heat and A/c, I want to replace the Honey programmable thermostat, but still reluctant to install it myself since the wire label different. My new Honeywell model is TH6110D1005 and it has following wire label. G O/B (W) C Y R Rc ...

Thermostat turns on furnace and then thermostat shuts back to HOLD [ 7 Answers ]

I believe that when we re-run the program with the correct date and time, if the temp has to go up, the furnace runs until it gets the appropriate temp, then it turns off and when it does that, the thermostat also turns off going to the HOLD state.:confused:

View more questions Search