Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hot Tub Installation
[ 15 Answers ]
Hello again! I want to hook up an electric hot tub my friend just gave me. (how lucky am I? :)) I know that it needs a 50-amp GFCI-protected 240-V circuit. I have read info regarding to where to place the outdoor switch box, etc. But there's one thing I can't seem to find. Do I install a...
No Hot Water to shower head, but Hot water to the Tub?
[ 2 Answers ]
My husband and I just purchased a new house. We have found that the shower pressure in the bathroom is wonderful however once you have set the right temp from the tub spout and switch over to the shower no hot water makes it to the shower head. We can only turn off the cold water completely in...
No hot water in tub
[ 3 Answers ]
Hello, I'm wondering if there's someone out there that can help me. Recently, my bath tub upstairs stopped having hot water. Most of the time, it is only luke warm. It is heated through gas, and I turned the water heater up quite a bit and still no hot water. Hot water comes out fine in the...
Hot Tub Disconnect
[ 4 Answers ]
From reading past questions and responses, I got a fairly clear idea about how to wire the GFI panel between the distribution panel and hot tub. Thanks for the references that people posted! There is still one requirement, however, that still puzzles me. The NEC calls for a disconnect to be...
Hot/Ground reverse on GFI receptacle
[ 3 Answers ]
My screened porch has a ceiling fan w/light and a 2nd light fixture, both running off an outside GFI receptacle. In short, I ran wire from the GFI receptacle to a double switch box; one switch is wired to the fan fixture, the other switch is wired to the light fixture. All has been working fine for... View more questions Search
|