Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Need to replace 'O' rings and Gaskets in Delta Faucet
[ 1 Answers ]
My Delta faucet which is probably 30 years old constantly drips. I have replaced the shower head so know it is the faucet. It is a single handle push up for on and twist to the right or left for temperature control. How do I replace the o rings and gaskets? Thank you
Dripping Delta Single-handle kitchen faucet
[ 2 Answers ]
I have a single-handle Delta kitchen faucet that will not stop dripping. I did some research online and learned to buy a replacement kit to replace the interior workings of the faucet. I have done that, and have replaced every interior part, both O-rings, the springs and seals (which I am told is...
Kitchen Faucet repair
[ 2 Answers ]
I need to replace a kitchen faucet spout. It is a Peerless two-handle. I have the new spout. What other parts will I need and exactly how does this thing come apart to just replace the spout?
Kitchen Faucet Repair Failure
[ 3 Answers ]
I was repairing a Delta kitchen faucet today and changing the control lever stems. Once I got them changed and turned on the water supply I found the control lever did not control the water flow. Water flows at the same speed whether I have the faucet handle in the off position or on position. I...
Delta Faucet in Tub
[ 4 Answers ]
Sorry for the multiple questions in the same day, but I am at a loss to explain what is going on with my tub's faucets. Currently the cold water side will not stop dripping. I have replaced the stem, the seat on the hot cold and diverter, but it continues leaking. I realize after doing this a... View more questions Search
|