Ask Experts Questions for FREE Help !
Ask
    djp6268's Avatar
    djp6268 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 14, 2009, 08:00 AM
    How to change the drive belt on a 18.5 HP Craftsman lawn tractor
    My problem is after getting the new belt over the pulley on the transaxle the instructions say to pull belt forward and place over the upper pulley on the motor. The problem is that the pully for the mower belt that is at the bottom of the drive shaft is much larger diameter than the drive belt pulley and I do not have enough slack in the belt to get over the lower pulley.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Jun 21, 2009, 02:51 PM

    Hi,
    Bad directions there! Try instead putting it on the front first, but not completely. By this I mean to install it above the deck belt pulley, in between the two pulleys You should have enough slack to then mount it to the transaxle and then into the motion drive part of the double-stack beneath the engine.
    Peace,
    Clarke

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman 2 lawn tractor v-belt for drive not mower deck size [ 3 Answers ]

I need to know the belt size for a craftsman 2 lawn tractor model# 917255911. The drive belt not the mower deck belt.

Drive belt on craftsman lawn tractor [ 1 Answers ]

When replcaing the drive belt , can you tell me how to "deflect the belt keepers"?

Lawn tractor drive belt came off [ 4 Answers ]

:confused: How in the world do you put the drive belt back on the pulleys after it has slipped off. It seems like I would have to break down the whole mower to get to it. Any help out there in 'AskMe' land? I have an MTD 12.5hp front engine mower. Jack M

Craftsman lawn tractor blade belt replacement [ 2 Answers ]

Okay, how do I get the belt onto the pulleys? Is there something I need to do with the deck? This is a craftsman 14hp lawn tractor model #917-255694. Is there a website that I can download the picture or instructions from a manual? I am having trouble trying to figure out how to get the belt...


View more questions Search