Ask Experts Questions for FREE Help !
Ask
    jonescreek's Avatar
    jonescreek Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 13, 2009, 08:54 AM
    Kenmore 587 dishwasher won't work
    Kenmore dishwasher panel lights blink and fade. If you push one of the options the lights go off. If you push start the lights go off. Can't get the dishwasher to start.
    Hot Corn Bread's Avatar
    Hot Corn Bread Posts: 70, Reputation: 3
    Junior Member
     
    #2

    Jun 13, 2009, 04:34 PM
    Sounds like a bad power connection - somewhere. It's like what many experience in their automobile. They cut the ignition on and the dash lights up, but try to start the car and all power is lost - because a battery post has a poor connection.

    You have almost enough juice to work your washer circuits but not enough to bring up a heavy current drain the pump motor requires. So first thing to do is look for a possible low voltage supply to the control board. Try unplugging the wiring connector plugs and look for any green and/or white corrosion on any pins. Spray with WD40. LOL

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dishwasher not working. Lights blinking, tries but won't work [ 2 Answers ]

I have a Kenmore 66516712000 dishwasher. Tonight my daughter's bathtub was on the counter above it and the seam cracked letting a baby bath full of water drip down the counter and into the dishwasher. Now it has various lights blinking (Cancel is on, and turns on though I did not ask it too) ...

Kenmore dishwasher- green light blinking- will not work [ 3 Answers ]

We have a 2.5 yr old kenmore (ultra wash quiet guard4) dishwasher that has the clean light flashing green and will not work. We could obviously see the heating element was broke- we replaced that and it is still not functioning. Is there a reset button> What else could the flashing green light...

Kenmore Dishwasher 16509200 - buttons won't work [ 1 Answers ]

We have a Kenmore Dishwasher, model #16509200, and it's worked perfect until about 3 months ago, the buttons no longer work. I tried it Christmas day and it worked great, but when I tried it the next day, none of the buttons would work. This morning, I pushed the Air Dry button for 4 seconds just...


View more questions Search