Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wall tile and vinyl floor
[ 3 Answers ]
I'm putting ceramic tile on one wall in the bathroom and vinyl floor down.what do we do when the tile meets the vinyl
Crumbling concrete wall/floor
[ 2 Answers ]
I live in a house approx. 10 years old. In some of the areas in my basement the concrete seems to be disintegrating (white powdery substance forming and breaking slightly the concrete) where the wall meets the floor. What exactly is this and what can I do to stop the breakdown of this concrete?...
Tile floor or wall first
[ 3 Answers ]
Hey, I am ready to tile my new shower. I allresdy installed the pan and the hardie backer. Every thing has cured. I am using 1/2 tile (in 12x12 sheets) on floor and 9x13 on the walls. Should I tile the floor or walls first?:confused: Lee
1/2 wall to cement floor
[ 3 Answers ]
I am putting a 1/2 wall in my family room. The slab is 34 years old (very very hard cement). Someone told me to use gorilla glue. Not sure about how well that would work. Looking for some more ideas. Also, this half wall is going up 3 foot and out 6 foot. (not to ceiling or other side of room) How...
Wall heater pilot light lit, but cuts off when I turn heater on
[ 6 Answers ]
I have a wall heater, the pilot light was out so I re-lit it a couple days ago and it went on.. about 4 hours later I noticed it was out again... same thing off and on for three days... this time I lit the pilot and turned the heater on it immeditly made a click sond and went out completely... it... View more questions Search
|