12.5 Briggs OHV

LEEADAMS Posts: 1, Reputation: 1

New Member

Jun 11, 2009, 10:22 AM

12.5 Briggs OHV

How do you adjust valves on 12.5 ohv?

ballengerb1 Posts: 27,378, Reputation: 2280

Home Repair & Remodeling Expert

Jun 11, 2009, 11:49 AM

This isn't your engine but the steps are the same. https://www.askmehelpdesk.com/tools-...hv-363820.html

Add your answer here.

Check out some similar questions!

17 HP Briggs [ 4 Answers ]

I have a 17 hp briggs OHV on a John Deer mower that is 3-4 years old. Have to move the flywheel past the compression stroke before the starter will turn the engine. Once cranked the engine spits pops runs about half throttle then dies. Noticed that it is blowing back through the air filter. ...

Engine switch V twin briggs for Briggs intek ohc [ 2 Answers ]

I would like to exchange a 19 hp V Twin into a Craftsman lt 2000 mower. It was originally equipped with a 22 hp Intek V OHC. I am wondering how different the wiring is going to be. Also is this possible? The 19 HP twin is Model 42A777 Type 1236 01. The Intek is Model 407777 Type 0174 E1 Thank...

10 hp Briggs [ 1 Answers ]

I have a 10 hp b&s on a genearator and it runs good on full choke and runs ruff when I trun the choke off. Also is there a way to bypass the on/off switch? It is kind of in pieces.

14/hp briggs [ 2 Answers ]

Hi i am trying to repair a 14/ hp briggs motor. This motor has ohv where i have never had a chance to work on i am from old school and not used to this newer equipment. Here is the problem first he carb was overflowing with gas i took it apart and cleaned everything with parts cleaner and hoped i...