Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to mount a wall mount pot filler
[ 3 Answers ]
I was thinking about installing a wall mounted pot filler in our kitchen. What type of fitting and mounting does this require. I am using ½” copper to a thread male. I will secure the pipe to the stud. Is this correct. How far out does the thread need to stick out of the wall.
Ceiling Fan Remote Control doesn't work after I changed the batteries
[ 4 Answers ]
I just changed the batteries in my Hampton Bay ceiling fan. Now the fan is running and won't respond to the remote control. The remote seems to be working properly. What do I need to do to get the fan and the remote to sync up once again?
How to change ceiling fan remote batteries on a hamilton bay remote control unit
[ 3 Answers ]
Before I break the darn thing, can you tell me if the back panel comes off or if I have to unscrew the top and bottom screws?
Hunter wall mount fan & light control (model 27186)
[ 2 Answers ]
The Hunter wall mount control has two black wires and one green wire. How do I know which black wire goes to the black wire from the wall and which goes to the white wire from the wall? Or doesn't it matter which wire is connected to which
Hampton bay Ceiling fan wall control
[ 10 Answers ]
I have a hampton bay delano ceiling fan, it came with a wall wired remote control. The wall remote uses rf to control the fan, it is wired into the house electrics. The wall remote has 2 black wires and a green ground. Both of the black wires have a note that says not to wire them into the white... View more questions Search
|