Ask Experts Questions for FREE Help !
Ask
    ifightfires247's Avatar
    ifightfires247 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jun 7, 2009, 02:44 PM
    Murry lawnmower transmition
    The transmition for my murry 38" lawn tractor will not ingage in any gear. I removed the rear end and tried taking it apart but could not. The gears seamed to engage while messing with it but when I reinstalled it it still did not work. Is there a way to take the transmition apart with out breaking it.
    tool shack's Avatar
    tool shack Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Aug 26, 2009, 11:33 AM

    Hi have you tried to heat the bolts? The lock bolts have locktite on each.. and make sher that you lay out the bolts.. so they go back to same spot.. good luck and hope this helps...
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    Aug 26, 2009, 02:49 PM

    Hi,
    If it is a Peerless (and some Spicer) transaxle, count to 17. If less than that, look for more bolts. There is one in the center that is visible and accessible by removing the input sheave.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Used Murry [ 2 Answers ]

I pyrchased a used 14hp 42" cut rider 2 weeks ago. The seller told me had put a new belt on blade deck I used it for about 3 hours nad belt came off, I put back on and it came off again approx 30 min later and it got cut. I have bought a new belt and put it on Sunday and it started to burn and...

95 murry [ 1 Answers ]

Does anybody have a 95-99 murry 18.5 hp or 96-99 yard machine 20.5 hp 46 inch deck they want to sell or know were I can buy a new bare shell?

View more questions Search