Ask Experts Questions for FREE Help !
Ask
    drawde127's Avatar
    drawde127 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 6, 2009, 09:12 AM
    How do you take the back off a gas dryer
    How do you take off the back of a gas dryer
    Hot Corn Bread's Avatar
    Hot Corn Bread Posts: 70, Reputation: 3
    Junior Member
    		  
    #2

    Jun 13, 2009, 04:57 PM
    You look at it real close and see what is holding it on. Usually it is some type of hex or phillip screws and you should obtain a tool that fits that screw to help remove it. Counter clockwise movement is the direction to remove a USA screw.
    Knives, pliers, and other items are often utilized.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Back off kenmore dryer [ 1 Answers ]

How do I get the back off my very old kenmore dryer to check the belt. The dryer will start for about 10 seconds then die on me. My father-in-law thinks it may be the belt.

Having my dryer vent to the side, not back [ 3 Answers ]

I have a gas Maytag and have been told it is an easy process. I see where I would know out the hole after this I have no idea what is required. Can anyone help?

Can not put back dryer [ 1 Answers ]

My dryer is Whirlpool Model GGW9878JQ2. I have put back drum and I think I have fitted the belt correctly under tensioner and around motor. Motor turn anti-clockwise but drum does not turn. IF I rotate the drum by hand anti-clockwise it turns but motor does not turn IF I rotate drum...

Take the back off my dryer [ 1 Answers ]

I have a Prodigy dryer, when in use, it leaves black specks on clothes. I think the drum is loose, so I am trying to take the back of it off. I have taken all of the screws off the back, but it still is not coming loose. It looks like its perhaps "glued", maybe? Help!

View more questions Search