Ask Experts Questions for FREE Help !
Ask
    annwms's Avatar
    annwms Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 4, 2009, 08:38 AM
    Kenmore 665 ultra wash dishwasher bad bearing
    Hi,
    Our dishwasher is @ 2 years old and according to the sears repair guy it has a bad bearing that will cost $461 to repair. Does anyone know of any other options or have experience in repairing themselves? We're already into it for the $75 visit and another $461 is just way too much money to spend for a 2 year old dishwasher. Any advice would be greatly appreciated.
    Perito's Avatar
    Perito Posts: 3,139, Reputation: 150
    Ultra Member
    		  
    #2

    Jun 4, 2009, 08:59 AM

    I agree. It's out of line.

    I would write a letter to Sears and ask them to consider repairing this under warranty. For two years, it's unreasonable for a bearing that costly to fail. If they refuse, go for another dishwasher -- but do what a reasonable person would do and don't buy it from Sears. I'm not saying that their products are low quality, I'm just saying that after I get stung, I don't put my hand back in the bee's nest.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Ultra Wash Dishwasher [ 1 Answers ]

I have a Kenmore Ultra Wash dishwasher that is approximately 5 years old. About 3 weeks ago the lock light started blinking. I held the No Heat button for 4 seconds to unlock which it did, but still will not start. Now, the delay 2 hour light is constantly blinking and my dishwasher still...

Kenmore ultra wash quiet guard deluxe dishwasher is stuck in wash cycle [ 2 Answers ]

I got a kenmore ultra wash quiet guard deluxe dishwasher for Christmas. My husband installed it and it seems like it is stuck in the wash cycle. It ran for an hour and a half and it never drained, so we finally shut it off. Any suggestions?

Kenmore Ultra Wash dishwasher [ 1 Answers ]

My Kenmore Ultra Wash dishwasher will not drain when finished. What are my options?

Kenmore Ultra Wash dishwasher [ 2 Answers ]

I am looking for a user manual or simply some explanation as to the various controls on the Kenmore Ultra Wash dishwasher. It is an older model #110753613 Serial number FFA0404041 I have done a lot of searching on the net and the only thing I can find is that Kenmore will give you the user...

View more questions Search