Ask Experts Questions for FREE Help !
Ask
    sdc3314's Avatar
    sdc3314 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 2, 2009, 04:44 PM
    Apparently there is no power to the thermostat. Digital readout is blanck
    Apparently there is no power to the thermostat. Digital readout is blanck
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Jun 2, 2009, 04:47 PM

    Check the breaker and fuse to your furnace. The if they are both OK, check the fuse at the control board in your furnace. If that is OK then take the t-stat off the wall and jumper between red and green and see if the fan will run.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing from non digital thermostat to digital [ 1 Answers ]

I have an old non digital Honeywell T87F thermostat, gas burner with baseboard water heat. Can I change to a new digital Honewywell RTH230B and how? Thank you

Replacing Analog Thermostat with Non-Programmable Digital Thermostat [ 1 Answers ]

Replacing Analog thermostat with White, Yellow, Red, & Black wiring with non-programmable digital thermostat Model #RTH3100C. Please help!!

Aux readout on a digital thermostat [ 1 Answers ]

I have a digital thermostat a lux pro and it's reading on the screen aux. it won't kick on to heat. How do I fix this?

Replace T87F thermostat with digital thermostat [ 1 Answers ]

My T87F has two wires Red and White. No code indicating how to connect to the new digital on.

View more questions Search