Ask Experts Questions for FREE Help !
Ask
    carman1950's Avatar
    carman1950 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 2, 2009, 09:11 AM
    a/c clutch compreser
    I have a 2003 toyota corolla car.The clutch on the compressor is not ingaugeing why not?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Jun 2, 2009, 09:27 AM

    The most common cause is a leak. Leaks are typically caused by stones hitting the condensing coil in front or behind the radiator.

    At nine years old, I'll bet that the hoses connectting the compressor needs to be replaced. That was about the lifetime I got on a much older Toyota.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is there a clutch adj. On a 1994 s-10 [ 1 Answers ]

I've got a s-10 that I can't get the clutch to work on. Ive replaced the slave cylinder and clutch master and the clutch and still can't get it bleed all the way. Ive bleed it till my pedal is stiff with little to no play in it at all. Im thinkn that maybe its bleed but needs adjusted.

Clutch is slipping? [ 8 Answers ]

I have Nissan 350Z manual transmission. When I step on the gas while driving, the car instead of accelerating speed accelerates the engine speed for few seconds. Does it mean that the linig of the clutch is worn?

94 GMC clutch [ 1 Answers ]

94 GMC Sierra 1500 5 speed The problem: push clutch in, put in gear, let out clutch without touching the gas and it just sits there. If I keep giving it gas it will move after 30-60 seconds, but it does it going into every gear if I try to drive it down the road. Any help would be great.

Problems with my clutch [ 2 Answers ]

I am hearing what seems to be my throw out bearing and the transmission is hard to put in gear. Could it be the throw out bearing or the slave cylinder? Or the throw out bearing holder?

View more questions Search