Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Shortening a cast iron sewer cleanout
[ 3 Answers ]
I have a cast iron sewer cleanout in my front yard that I want to lower by a couple feet due to landscaping. Can I just cut this with a grinder and use a Fernco adapter to attach a new PVC cap housing on? Is there a metal solution? Thanks for ideas.
Need to Remove Cast Iron Bathroom Sink
[ 1 Answers ]
I need to remove a cast iron bathroom sink that's bolted onto the wall. I don't see any bolts. Help! Suggestions?
Removing brass fittings from Cast Iron pipe
[ 3 Answers ]
I need to snake the line under my bathroom sink. The problem is I have a dual sink setup. The vent pipe is also connected there so I have a cast iron cross fitting where the four meet (the two sink drains, the vent pipe, and the drain to the main line). I was attempting to remove one of the...
Removing Brass pipe from Cast Iron
[ 8 Answers ]
http://www.msnusers.com/dddm86ru89coki506bhl3iuih3/Documents/Pictures/May162007drain%20004%2Ejpg Hi, I'm trying to remove a brass pipe from a cast iron floor drain in the basement. The pipe is part of a backwater floater ball unit. I removed the brass cleanout plug with a crescent wrench...
Must remove concrete floor section to replace rotted rod iron drain pipe in bathroom
[ 1 Answers ]
What is the best way to remove concrete flooring section in a bathroom? We found a broken rotten rod iron drain pipe when tearing out walls for remodeling and unfortunately (blessing) found out the pipe was rotted. Plumber says to replace with PVC but we have to dig up/cut up the floor ourselves.... View more questions Search
|