Ask Experts Questions for FREE Help !
Ask
    pbfamu's Avatar
    pbfamu Posts: 4, Reputation: 2
    New Member
    		  
    #1

    May 29, 2009, 05:53 PM
    Heating element for older kenmore
    I have an older kenmore dryer. I need to install a heating element for it but I am having trouble getting to it to replace it. How do I go about opening the dryer to get to the area where heating element is located? I have taken the screws from the back of the dryer but I do not know how to remove the back of it. Help...
    Perito's Avatar
    Perito Posts: 3,139, Reputation: 150
    Ultra Member
    		  
    #2

    May 29, 2009, 06:40 PM

    I think you remove the front of the dryer. Here are some instructions:

    Common Appliance Repair Solutions - Whirlpool/Kenmore standard door
    pbfamu's Avatar
    pbfamu Posts: 4, Reputation: 2
    New Member
    		  
    #3

    May 29, 2009, 07:08 PM

    Thanks.. my dryer opens from the front, not the top. Does that make any difference?
    Perito's Avatar
    Perito Posts: 3,139, Reputation: 150
    Ultra Member
    		  
    #4

    May 29, 2009, 08:08 PM

    No. The instructions on the web site are for a dryer with a door in the front.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heating element for a older Kemore electric dryer [ 1 Answers ]

Hi All, Our Kemore Dryer stopped working today, the drum is spinning but it is not heating up. I believe it is the heating element. Can some point me in the direction of where it might be located at. Thanks, Scott

Kenmore Dryers Heating Element [ 1 Answers ]

How do I replace the heating element on a Kenmore Dryer

Kenmore Dishwasher heating element [ 1 Answers ]

I have a Kenmore dishwasher model 665.1544592 that needs a new heating element. Has anyone changed one before and how do I go about doing this? Can this be done from the top by pulling out the element and unhooking the electric connections. It looks pretty simple if I can do that. Thanks, Jason

Kenmore heating element [ 1 Answers ]

I have a Kenmore dryer six years old. I just got problem there is no heat. Then I change the heating element. It work find for two cycle each cycle took 60 minutes then it quit working then I did Change again It repeat the same problem so what's wrong? Would you give me some asvise to trouble...

View more questions Search