Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Anti Siphon Hose bib
[ 11 Answers ]
I am presently purchasing a home built in 2001. It looks as though I have anti siphon hose bibs, but nothing like I have read being explained by others. This bib seems to have a bronze cap that is added to the bib with holes around the rim where the hose connects. There is a spring and rubber...
Anti-siphon valves at different elevations
[ 5 Answers ]
(this has been moved by me from another thread here) If you have 2 valves in different places at different elevations, is it true that each valve only needs to be higher than the highest sprinkler that it services? I would like to split the supply line and service 2 different areas. Its...
Anti-Siphon Valve Installation
[ 7 Answers ]
Hello, I am in the process of installing an anti-siphon valve for my home irrigation system. Everyone says it needs to be 6" above the highest sprinkler head. My question is: Does this mean the height of the sprinkler head in the up position or the height of the sprinkler head when the lawn...
Why is my Hotpoint FFA97 Frost Free freezer leaking?
[ 2 Answers ]
My Hotpoint FFA97 Fridge Freezer accumulates ice in the bottom of the freezer compartment. During the first year it also did this and the Engineer fixed it without replacing any parts, but can't remember what the cause was. I've checked the door seal and am sure its not that. The rest of the...
Leaking Frost Free Hose Bib
[ 1 Answers ]
I have a brand new house. If the frost free hose bib with anti-siphon is turned in the on position and either a sprinkler or sprinkler timer is installed, water drips out from the bottom of the valve stem. What would be the cause of this? I know that there is back pressure on the anti-siphon but... View more questions Search
|