Ask Experts Questions for FREE Help !
Ask
    leehelen's Avatar
    leehelen Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 4, 2006, 01:18 PM
    Hampton Bay ceiling fan UPC
    Hi there,

    I'm looking for a part replacement for my fan (52''scorpi 137153). Unfortunately I'm not able to find the UPC so I can't call Hampton Bay for the part. Do any one of you know how I could find the code?

    Thanks!
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Oct 4, 2006, 10:30 PM
    The UPC off the box code? I don't see how you'd need that. Just contact Hampton Bay, if they can't help you no one can.

    What part do you need?
    leehelen's Avatar
    leehelen Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 5, 2006, 09:44 AM
    This fan was bought 5 years ago so I don't have any receipt or user manual any more, and that's why I can't get the UPC. I'm looking for the glass shade for the fan.
    jgj6331's Avatar
    jgj6331 Posts: 153, Reputation: 19
    Junior Member
    		  
    #4

    Oct 5, 2006, 10:52 AM
    The model / serial number should be on a sticker on the top of the fan - perhaps, I don't know for sure, also a UPC bar. Seems that Hampton Bay could come up with the part from the model / serial number though. Have you contacted them? Otherwise, many better hardware stores (Lowes, Home Depot, etc.) carry a variety of replacement shades for fans. If yours is some fancy-schmancy type made only for that particular fan - you might have to get a complete set of the new ones to match...
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #5

    Oct 5, 2006, 11:08 AM
    You know the model name, and, as stated, there should be a model number on the fan body. This should be enough to contact Hampton Bay with.
    heatman380's Avatar
    heatman380 Posts: 1, Reputation: 1
    New Member
    		  
    #6

    Oct 14, 2014, 06:42 AM
    I have a Hampton Bay ceiling fan M# EF200DA52 with a UPC# 082392460044 and need the 5 fan blades. Please Help.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #7

    Oct 14, 2014, 02:31 PM
    We sell nothing here, Go to Home Depot and they can give you info or contact Hampton Bay, ‪877-527-0313‬
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

New Hampton Bay Ceiling Fan... [ 5 Answers ]

I bought a new Hampton Bay celing fan w/a built it light kit and remote. After installing it the lights work fine, but the fan only works on the low speed. Is there a master speed setting in the fan that needs to be set on High? There are no pull chanins. Thanks.

Hampton Bay Ceiling Fan [ 2 Answers ]

I have a fan that suddenly stopped working. There is a hum as if the motor would like to turn in all 3 speeds, however, it does not. Any suggestions would be much obliged.

Hampton Bay Ceiling Fan [ 1 Answers ]

I have a Hampton Bay Windward II ceiling fan with remote control. Unless the room temperature is 80 degrees or above, neither the fan nor the light will operate. If I leave the main power in the on position, and the remote control is set to off, the fan will turn on all by itself once the...

Hampton ceiling fan [ 2 Answers ]

Hi. Hampton ceiling fan/lights. Sometimes the lights begin to flicker and go out for a few seconds, then come back on. Also, the fan doesn't work after about 4 years of operation. When the fan is turned on by the remote, I simply get a humming noise. I'm not real handy electrically. I took things...

Hampton Ceiling Fan [ 2 Answers ]

I just purchased a light to add on to a ceiling fan w/no light. Problem is fixture has a black and white wire and ceiling fan only has 1 blue wire for light. What do I need to do?

View more questions Search