Ask Experts Questions for FREE Help !
Ask
    88crxdx's Avatar
    88crxdx Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 27, 2009, 12:36 AM
    1988 Honda CRX No start
    Ok guys, I am stumped! I have not been able to get my car started. I am running a CRX DX that I have converted the entire wiring harness to a 91 CRX Si. I have tested my main relay, my harness, have measured the voltage that my MAP is putting out (K-Test) both at the MAP sensor, as well as the corresponding pins at the ECU with correct voltage, and still nothing! The only way I can get my fuel pump to kick in is by jumping the main relay harness at 5 and 7. I have checked every fuse in the car for continuity, and have triple-checked all of my grounds. Any suggestions?
    88crxdx's Avatar
    88crxdx Posts: 2, Reputation: 1
    New Member
    		  
    #2

    May 27, 2009, 12:39 AM

    Also to include, I am running a b16a with the injector resistor box, obd0 injectors
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1988 honda civic hard to start when hot [ 3 Answers ]

My 1988 honda civic is sometimes hard to start when hot. After cooling down for 1/2 hour or so, it will then start. What's happening?

1988 Honda Civic Won't Start [ 1 Answers ]

1988 Honda Civic, was running and just quit; now won't start at all. Turns over, lights working. Backfires while trying to crank. Help!

1988 Honda Civic Won't Start - Stumped [ 7 Answers ]

Would not start, received from sister her boyfriend thought it was fuel pump. Replaced fuel pump (he was half way done when I got the car). Still wouldn't start without ether and high RPMs. Started checking systems, found he had replace the brake power booster check valve with a fuel filter? I...

View more questions Search