Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat.
[ 4 Answers ]
I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...
Wiring Diagram for Lux TX9000TS thermostat
[ 1 Answers ]
I have an American Standard Heat Pump with electric heat strips, I want to change the digital thermostat to a Lux programmable TX 9000ts. The american standard thermostat wiring is as follows R- red wire W2- jumper with a brown wire W1-jumper with a white wire Y- yellow wire G- green wire O-...
Replacing my old thermostat bryant lr11746 to LUX TX9000TS
[ 6 Answers ]
Please help. I have an old thermostat and know nothing about it but wanted to put the new Lux TX9000TS in for programming my heating and cooling. MY old bryant lr11746 thermo is hooked up with G1, R, O, C, E, W2, and a Y. Is there anybody that could help me figure this out as to what needs to go...
Thermostat Changeout: from Aprilaire 8346 to a LUX TX9000TS (Wiring trouble)
[ 1 Answers ]
I would like to change from an Aprilaire 8346 Digital t-stat to a LUX TX9000TS but am having a bit a trouble determining whether they're compatible. The Aprilaire wiring scheme is as follows: C W2 R G Y O/B where in this application the O/B is an O. What wires (if possible) would go to... View more questions Search
|