 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Where do I put the wires to get the air to switch on to the thermostate
Hi I have a problem I got a new thermosate it is a ritetemp anyway I got no instructions with it. I am trying to figure out where to hook up the wires on the thermostate to where the air comes on. There are 11 screws and 3 wires where they were hooked up would not turn the air on? Anyone can you help?:mad:
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
It's a hampton ceiling fan. The speed pull switch needed to be changed, but forgot the wiring to install
We had a ceiling fan w/ light installed where there was previously only a light (but wired for a fan as well). Now it's time to replace the regular light switch with one that will control both the fan & light. Currently the regular switch has 2 black wires going to it and the fan is operating...
[I replaced the chin switch for my fan and it runs slower than before. It has 4 wire that is attached to the switch.( blue green black & yellow) Do I have the wires in the worng sequence? Or just get a new switch?:confused:
First of all I want to thank these forums for helping my family get heat tonight. I woke up at about 3am knowing something was wrong. Sure enough the heater wasn't heating. After looking over the heater myself and seeing a red blinking light I came to the panel that showed this was a ...
View more questions Search
|
