 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Interputting capacity of a circuit breaker is predecided... category wise by the manufacturer.
Which KA rating breaker is to be selected based on the maximum short circuit current ability to deliver by the feeding equipment such as transformer or generator. This could be found out by % impedance or sub transient reactance of a transformer or a generator. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Can I use a 10 kAIC main breaker in a main disconnect or does it have to be a 35 kAIC main breaker? I have a 10 kAIC, 225 amp breaker on hand, and I did not want to have to buy a new 225 amp 35 kAIC breaker if I did not have to. My indoor load center has a 10kAIC, but the outdoor, main disconnect,...
Replacing a 25 year old York split system. Looking at two heat pump option to replace (York & Trane) One dealer ran their heat load program and said we needed a 3 1/2 ton unit (the Trane). The other deal sized it based on the existing unit to be replaced and square footage of house (about 2250)...
I want to install pvc below grade at my downspouts. There will be several downspouts that run into the pvc trunk line via t connectors. Trying to find out how much water 4" and 6" pvc will carry to see if I can start with 4" then down the line as more downspouts are connected to the system step up...
A particular type of plastic soap bottle is designed to have a capacity of 15 ounces. There is a variation in the bottle manufacturing process. Based on historical data, suppose that the bottle capacity can be reasonably modeled by a normal distribution with a mean of 15 ounces and a standard...
View more questions Search
|
