Ask Experts Questions for FREE Help !
Ask
    nelsonesp's Avatar
    nelsonesp Posts: 3, Reputation: 1
    New Member
    		  
    #1

    May 20, 2009, 10:14 PM
    My AC keeps blowin fuce on the control board
    :confused: 5 amp fuce keeps blowin on the contol board in my AC furnace, went Itryed to put the AC on
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    May 21, 2009, 04:20 PM
    You could have a short in the low voltage wiring inside OR the wiring going to the outside unit.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bad control board [ 13 Answers ]

We have an older Trane gas furnace (TUC series) and the control board went bad (model 50e47-060). The furnace would come on, but there was no signal to the ignitor per the technician who wanted to charge almost $1K to replace the control board. With money being so tight, we purchased a new board on...

My AC keeps blowin fuce on the control board [ 4 Answers ]

5 amp fuce keeps blowin on the contol board in my AC furnace, went Itryed to put the AC on

Control board [ 4 Answers ]

I'm working on a forced hot air furnace that's in a basement that got flooded and the furnace was only on 2-4 so it looks like the whole blower motor and control board transformer got flooded. I responded to a no heat call today check the unit the unit won't do nothing, it has power coming from...

Control board [ 1 Answers ]

My control board seems to not be working the light won't come on it is a goodman 90% furnace I do not have the home owners book for it

Can I install a fan control board? [ 3 Answers ]

I am a broke, but resourceful guy who got a quote from an HVAC company to install a new fan control board in my Ducan furance for $420. He wrote to part numbers on the estimate. Ducane part 20430801 (Ducane) & ST9160B1076 (Honeywell). He told me it would take him 1-1.5 hrs to install. To make...

View more questions Search