Ask Experts Questions for FREE Help !
Ask
    teacherjenn4's Avatar
    teacherjenn4 Posts: 4,005, Reputation: 468
    Education Expert
     
    #21

    May 21, 2009, 08:45 PM
    Quote Originally Posted by Milo Dolezal View Post
    Is that shower faucet 1/2 turn ?
    Each side--hot and cold can turn a full turn. We have to turn the hot almost 3/4 turn, but barely have to move the cold for it to come on , if that makes a difference. I took a picture of it, but am not sure how to post it.
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
     
    #22

    May 21, 2009, 08:52 PM

    That may be the problem. The stems should turn only 1/2 way. It means they are not installed properly or the "stop" point is broken off.

    Stems should have small protrusion that line up with notch in body.

    Stems have plastic parts. If you apply too much pressure on them during closing - they will pass the closing point and continue to spin around.

    Question: is this newer faucet of old model ? Lever handles of round handles ?

    See if that is the problem... Come back and let us know what you've found out... Thanks... Milo
    teacherjenn4's Avatar
    teacherjenn4 Posts: 4,005, Reputation: 468
    Education Expert
     
    #23

    May 21, 2009, 09:01 PM

    I've had the stems replaced and repaired before, but that is what the plumber is coming out to do. The actual handles are levers of solid brass. Price Pfister. He said if that doesn't work then I have to have the valve in the wall replaced at a cost of almost $1,000. So, I was hoping it would be the shower head or the stems. Thanks for all of your help!
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
     
    #24

    May 22, 2009, 11:40 AM

    I am sorry he is charging you $1K for the valve swap. Maybe you could get couple more estimates and see what other plumbers have to say.

    We charge $180.00 for same-to-same valve swap + the cost of the valve. It takes about 45minutes to do. In your case, cost of the two-handle PP shower valve and trim is under $100.00.

    Take photo of your existing valve, go to Home Depot and by exactly the same valve and give it to the attending plumber to install it. You may save few hundred dollars right there.
    afaroo's Avatar
    afaroo Posts: 4,003, Reputation: 251
    Ultra Member
     
    #25

    May 22, 2009, 01:20 PM

    I agree with Milo follow his instructions and you will really save some bucks, Thanks.

    John

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No water comes out of showerhead, [ 4 Answers ]

I can't get the little knob that turns on the shower and turns off the water in the tub to stay up,I took off the showerhead that is not the problem The water does not go up to the shower unless I place a rag over the pipe and turn the water on.

No water in the showerhead or tub [ 4 Answers ]

Hello. I have a speakman shower set with one handle for H or C, and another handle to switch from tub to shower. There is very little water pressure coming to tub and nothing to shower. The water pressure from the mainline to the shower/tub valve is strong but doesn't come out. I replaced the...

Shower - no hot water, no pressure, no water to showerhead [ 4 Answers ]

About 1 month ago the shower starting having problems. The water is only tepid and will not get hot (the water in the sink in the same bathroom is hot as well as the rest of the house). Combined with the temperature, there is no water pressure in the shower. At first you could take a shower then...

Random relaease of water from a showerhead [ 1 Answers ]

I have recently encountered a random release of water from my showerhead. The shower had not been unsed for several hours, suddenly I heard water come out of the showerhead. I suspect it was water being held in the pipe from the tub diverter, but what would cause it to suddenly release?

No water from showerhead [ 6 Answers ]

Hello! I have a two knob faucet with a pull-up lever on the spout for the bath tub which diverts the water to the showerhead. When I went to pull the lever up today to turn the showerhead on, there was nothing. It stopped the water going to the tub, but nothing was coming through the...


View more questions Search