Ask Experts Questions for FREE Help !
Ask
    notv's Avatar
    notv Posts: 4, Reputation: 1
    New Member
     
    #1

    May 18, 2009, 08:14 AM
    Panasonic TV combo no audio on TV pv-2061
    Panasonic TV combo vcr fm model no: pv-2061 chassis km2001sg.no audio on TV but everything is working fine I do have audio in vcr and fm. But when you select TV no audio speakers are OK.
    Perito's Avatar
    Perito Posts: 3,139, Reputation: 150
    Ultra Member
     
    #2

    May 19, 2009, 05:08 AM

    Since audio is coming from the VCR and FM, you know that the amplifier circuits are OK. Since it doesn't come from the TV section of the circuitry, you have to assume that there's a problem there.

    Part of a TV circuit separates the audio from the composite audio/video signal. That is possibly damaged. Also, there's an FM detector circuit. I'd have to see a schematic to see if there's a separate FM detector for the FM radio and for the TV. If they are separate (typically, there's only one chip nowadays), then that could be bad.
    notv's Avatar
    notv Posts: 4, Reputation: 1
    New Member
     
    #3

    May 19, 2009, 06:15 AM
    Thank you for your help I talk to my kids teacher she told me just to leave it ,she was not going to spend money been the signal is going digital . That she would use the vcr for the kids. Thank you .

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Multimedia Audio Controller /REALTEK AC'97 Audio [ 10 Answers ]

Hi - it appears that the multimedia audio controller problem that I had has now morphed into a REALTEK AC'97 Audio problem. I loaded a driver for the mother board to fix the MAC problem after helpful folks assisted me in getting the specs on the motherboard (ECS PS45A/DX+1.0 if it makes a...


View more questions Search