Ask Experts Questions for FREE Help !
Ask
    tbanks5697's Avatar
    tbanks5697 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 15, 2009, 03:00 PM
    How do you replace the diverter for the bath tub and shower?
    How do you replace the diverter for the bath tub and shower?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    May 16, 2009, 06:39 AM
    Quote Originally Posted by tbanks5697 View Post
    how do you replace the diverter for the bath tub and shower?
    There are two types of diverter spouts. Slip on and threaded spouts, (see images) Look under the spout next to the wall. If there's a small opening then you have the slip on type. If not then you have the threaded type. Get back to me with the type of diverter that you have and we'll go from there. Regards, Tom
    Attached Images
      

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to repair a Shower/Bath diverter switch? [ 8 Answers ]

I saw one thread answering the question but still not quite sure. When I turn on the tap the water comes out from both handheld shower and the bath tap. The switch seems to be slightly losen. I have uploaded a couple of pics of my faucet and the diverter switch. Which equipment should I...

Bath/Shower Diverter Not Working Properly [ 10 Answers ]

I am trying to replace the diverter in my bath/shower. I have bought a Waltek replacement part (W-7) (Master Plumber replacement) It apears to be the same type of diverter as the diverter I am trying to replace but I cannot be sure until I have removed the old one. My challenge is trying to...

How to replace shower diverter [ 13 Answers ]

Hello all, I have this shower diverter that needs to be replaced. I have a photo of it. My question is do I have to replace this whole unit? I can't figure out how to get the piece with the knob seatings off.

DH replaced shower/bath DIVERTER w_ all new parts- STILL doesn't work! [ 10 Answers ]

SITUATION: We have 2 houses that both have the SAME shower/bath diverter problem. (Houses differ in age and water pressure so I seriously doubt it's 'their' problem.) My husband replaced the diverters with all new parts in each of the houses... :confused: WHY are we still getting water...

Bath spout shower diverter failed [ 1 Answers ]

The pull-up diverter in the shower spout just suddenly ceased working this morning. There is no change in the flow of water when it is pulled upward. Do I have to replace the whole spout or is there another way. The walls are tiled so I fear having to tear that out if I have to replace the spout. ...


View more questions Search