Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Trane XB80 Furnace not working
[ 20 Answers ]
I don't have a copy of the owner's manual to properly troubleshoot the furnace. So, I just follow the written instruction on the cabinet. I turned off the switch and the gas valve, and then waited for the smell of gas. When I didn't smell any gas I then proceeded by turning on the gas and the...
Trane XL20i heat pump requires Trane 900 series thermostat?
[ 2 Answers ]
Hi, I was wondering if the Trane XL20i heat pump requires the use of Trane's 900 series thermostat or if a Honeywell VisionPro IAQ thermostat can be used.
Trane Gas Pack Shuts Off Until Breaker Reset.
[ 2 Answers ]
All, I have a Trane gas pack (AC and propane heat) that is approximately six years old. I awoke this morning to a cold house. Everything seemed okay on the thermostat, so I checked the house breaker. The house breaker had not tripped, but resetting the breaker enabled to the furnace to start and...
Tran XB80 error message Pressure Switch erro
[ 1 Answers ]
I have a pressure switch error on my Tran furnance- this is causing no call for heat. I replaced the pressure switch and that seemed to work for a couple of days, now its not calling for heat and Im getting the same error. I've cleaned out the drain hose and made sure there are no obstructions. ...
Reset button keeps needing to be reset
[ 2 Answers ]
The reset button on our oil furnace needs to be reset every 10 to 14 days. What can be the problem? We are leaving for the holidays and I'm concerned that we could come home to frozen pipes. View more questions Search
|