Ask Experts Questions for FREE Help !
Ask
    Kitty_9098's Avatar
    Kitty_9098 Posts: 2, Reputation: 1
    New Member
     
    #1

    May 12, 2009, 08:37 AM
    MTD 42" mower goes dead or runs sluggish with blades are engaged
    My Mom has an MTD 42" riding lawnmower. The mower starts just fine, but you engage the blades the mower either goes dead immediately or runs very sluggish. Could this be a shear pin problem or something binding under the mower deck? Any help would be greatly appreciated.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    May 12, 2009, 08:42 AM

    Pull the spark plug wires, disengage the blades and manually turn. Do the blades spin freely?
    Kitty_9098's Avatar
    Kitty_9098 Posts: 2, Reputation: 1
    New Member
     
    #3

    May 12, 2009, 12:13 PM
    I'm don't know if they'll turn freely or not. I don't have the mower at this time. I was going to pick it up today and drop off my rider, but we've got rain again today and I haven't gotten it yet. Thanks for your quick response though. I'll check that as soon as I get to the mower.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman riding mower engine stops when blades are engaged [ 15 Answers ]

I have a Craftsman 'Garden Tractor', model number: 917.273070. It has a Kohler engine (model number: CV22S, type number: 75534). The engine starts fine and will run without any issues in all gears. However, immediately once I engage the blade clutch the engine begins to stall. If I place the...

Lawn Tractor runs but dies when blades are engaged [ 4 Answers ]

My troy bilt 17.5 42" lawn tractor was cutting the lawn just fine when the wife I love hit a rise in the yard, slamming the blades into the ground and killing the engine. Now, it will start just fine but when you engage the blades, it kills the engine. What did the wife I still love do to my lawn...

Craftsman 42" Riding lawn mower cuts off when blades engaged [ 2 Answers ]

I have a Sears Craftsman 42" riding lawn tractor that has the electronic blade engage switch. The mower runs fine but when you engage the blades it runs for a few seconds and then shuts the mower down. I have bypassed the safety switch under the seat and also had to replace the clutch the pulls in...

Riding mower sputters & back fires when blades are engaged [ 2 Answers ]

My 2002 Scotts 1642h lawn tractor stalls sputters chokes & backfires when blades are engaged but will operate at low speed or w choke on and resume running smothly when blades are disengaged. The carb has been cleaned thoroughly, new fuel filter and plug.got any suggestions ?

Mower dies when blades engaged [ 2 Answers ]

Just purchased a brand new craftsman 27hp 50" zero turn. Cut a 50 yard swatch when the engine choked. After finally restarting, the engine stalls and quits whenever the drive levers are moved out of start/park or when the blades engaged. Help :mad:


View more questions Search