Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Shower cartridge installation
[ 2 Answers ]
I have replaced a Moen cartridge in my shower. I did not notice the position of the old one when I removed it. Now I have very little water pressure. How do I find the right position for the cartridge? Thank you! >Moved from Forum Help<
Shower cartridge installation
[ 5 Answers ]
I have removed a Moen shower cartridge and did not notice how it was positioned. It works and I am getting water but with very low pressure. How should the cartridge be positioned? Thank you.
New shower cartridge leaks
[ 1 Answers ]
To try to correct a leak in my single lever American Standard shower head I replaced the ceramic cartridge. Because I was in a hurry I decided to by an immediately available cartridge with a diverter. I would then grind off the diverter portion that sticks out. All was find however the show still...
Identifying a shower cartridge
[ 1 Answers ]
I know that a shower cartridge is most commonly identified by how it looks. However, I came across one recently that I cannot id. It's a single handle, turn to open and adjust valve. The acrylic knob is held on by a metal clip inside the handle (no screw). Behind the knob are the screws holding on...
Remove shower cartridge
[ 2 Answers ]
I have a Moen shower control, about 20 years old, no model number evident. The flow, both hot and cold, seems to have gradually diminished. The handle freely moves to both extremes as well as off-on. I tried to remove the cartridge to look for a clog, but couldn't figure out how. I was able to... View more questions Search
|