Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Removing glued ABS fitting to ABS piping
[ 5 Answers ]
I glued an ABS toilet flange to ab ABS pipe roughing. The fitting did not go down all the way and is 1/2" proud of the tile flooring. I now want to remove the fitting and replace with a new fitting. How do I do it without damaging the receiving pipe. Pipe is in concrete floor. Thanks, Bob
Carpeting over ABS Pipes
[ 2 Answers ]
Hi I am planning on carpeting my basement which has 4 ABS pipes sticking out of the floor from the roughed-in plumbing. I would like to cut these off level with the floor so that I can carpet over it, but can't seem to find a product that I can insert in the pipe to seal it off. (I'd rather...
Removing urethane glued wood floor
[ 2 Answers ]
I put down a solid wood (3/8) maple floor about a year ago (after hurricane Katrina). In the same room that the floors were installed, we later found that we had an unrepaired fireplace that allowed water to get under the wood floor, causing speed bumps in the room. We are now in the process of...
How much carpeting has to be down in an apt?
[ 7 Answers ]
Hi there- I know that in NY apartments have to have area rugs covering at least 75% of the floors. Is there a law similar to that here in MA? My neighbors above me ripped up their carpet and put down linoleum(SOOO LOUD), which they weren't supposed to do because we rent. I want to go to my... View more questions Search
|