Not your question?
Ask your question
View similar questions
Check out some similar questions!
Swimming pool top rails
[ 4 Answers ]
I have a 21” round above ground pool and the top rails are rusting through. The rust is falling in the pool. I put the pool up about four years ago. It was given to me from a friend who said he only used it for one year, then moved and took the pool with him intending to put it back up but never...
Shocked in Swimming Pool
[ 3 Answers ]
Last summer I was shocked while using my inground swimming pool. The pool is probably 35 years old. We have owned the house for 18 years. After I was shocked, an electrician came and found that there was no GFI nor was the pump grounded. Thought it was fixed. Earlier this year, after sticking...
Swimming Pool Lights
[ 2 Answers ]
Hi my wife and I have just bought a villa with a pool, So we are not yet clued up! When the pool was partly drained for the winter we noticed water in the light fittings. The pool man said this is OK. Is it OK? Chewp :confused:
Swimming pool sub panel
[ 1 Answers ]
I am installing a 100 amp pool sub panel for an inground pool. I am running #4 thwn in pvc from the house to the sub panel. My question is can I put a junction box in my basement and convert to #4 romex to the main panel. Question #2 Do I attach the #8 bare bonding wire to the ground bar of the...
Swimming Pool
[ 1 Answers ]
I am building a peanut shaped pool 20x40 (3-8ft.) with a water fall in the middle and 4 deck jets. Two in each corner. Iam thing 2 skimmers and 4 returns? Also I would need an auto water leveler and suction for cleaning system. Looking for a drawing on how to plumb. There is no heater or spa. 2... View more questions Search
|