 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Removing lines from ms-config
Ok, first of all, I searhed this question on the internet, and I followed the instructions on many different sites, but it didn't work! I must've deleted the wrong registry keys like five times!
So I come to you guys... There are lines of unchecked programs in my MS-Config and I want to delete them. Under location, most of it has something like "HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Ru n" (HKEY_Current_User\etc.)... There is one that just says "SOFTWARE\Microsoft\Windows\CurrentVersion\Run "... I went under several different HKEYS and deleted the stuff under "SOFTWARE\Microsoft\Windows\CurrentVersion\Run ", and that entry still isn't gone! Help? I am using Windows XP, by the way. |
||||
|
||||
|
removing lines from ms-config
From which tab you are removing the options.. (startup) one
I think you can't.. it contains all those listings of s/w installed, check and uncheck is to load them after computer start or not, you can't simply remove them from registry until you uninstall the s/w itself |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My home is 16 years old, I've had it for 5 years. I am on a pump - with 70LBS high cutoff and 55lbs Low turn on. All copper - I have 2 Delta 1600 shower faucets - one tub spicket with shower diverter - one shower only. The tub/shower combo has allways had only a trickle of cold water and...
I have a problem with air when I turn on any water outlet in the home, including when the toilets flush. I am on a submersible pump well system. I just recently purchased the home which was empty for about two years. The air is not all the time, but when it does it, it spurts for 5 sec.- 30 sec. at...
Some time back I installed a new water heater and it had the factory installed heat traps. The instructions say you MAY have to install one or more 90° elbows in order to make a “U” configuration in the supply pipes. It also shows the pipes running vertically from the heater. I’ve read on various...
I need to add a hook-up for our gas dryer in the basement. After surveying what is already there I have noticed that all of the gas lines run (hang actually) about 10” below the floor joists. I’m wondering is this code (I live in Maryland)? Why did they not run them along the bottom of the...
I have an old (atleast 10 years) RCA television. A few months ago it randomly developed a problem where white lines with a redish pink in between cover the entire screen. The lines are horizontal at a slight angle and go all the way across the screen. This happens spiratically and goes through...
View more questions Search
|
