Ask Experts Questions for FREE Help !
Ask
    Maverick64857's Avatar
    Maverick64857 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 2, 2009, 10:18 AM
    Murray Model 9-38608X92 D.O.M. 1019 IPB, Operator's ,Wiring Manuals
    I Recently got a KILLER DEAL on the 38" Rider Mower listed in the title. Runs GREAT but won't crank without jumping the Starter Solenoid! NEW Battery, Positive Cable, Starter Solenoid, 4 Position Starter Switch. I suspect it's a faulty Seat Switch, Mower Disengage Switch, or Park Brake Switch. My PROBLEM is I can't find MANUALS or a WEB SITE that recognizes my MODEL NUMBER (including the MURRAY site) NEED some HELP HERE!! Am I on the right track here TROUBLESHOOTING? WHERE can I get MANUALS? The Mower was assembled in Lawrenceburg, TN. Thank you
    hank101's Avatar
    hank101 Posts: 1, Reputation: 1
    New Member
     
    #2

    Jun 6, 2010, 05:50 AM
    It is most likely one of the safety switches you have discussed as they interrupt the start sequence via the solenoid. You have to check each switch independently for change of continuity relative to the engaged and disengaged switch position to determine which switch may be at fault. If you find that all are working then check for a shorted lead wire from any of the switches next by checking each for continuity. Good luck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Murray Model 42591X8B [ 2 Answers ]

I have a riding lawn tractor "Murray Model 42591X8B", 17 horses. During the last cut, the rear transaxle was lacked and stopped the engine. I replaced the motion drive belt but it didn't solve the problem. I still can start the engine but as soon as I release the pedal the engine will die (rear...

Murray model 309000x8NA [ 1 Answers ]

The mower will not travel when not engaged; but will travel when blades are engaged. What is causing this problem?

Murray 9-38608x92 belt diagram [ 3 Answers ]

looking for a murray 9-38608x92 belt daigram. thanks anthony


View more questions Search