Ask Experts Questions for FREE Help !
Ask
    a_launius's Avatar
    a_launius Posts: 20, Reputation: 1
    New Member
     
    #1

    Apr 30, 2009, 05:34 PM
    Lennox a/c fan on outside
    The a/c cuts on and the fan won't spin. If I help it along with a stick going clockwise the house will cool but the a/c won't turn off. If I spin it counterclockwise it blows hot- which way should the fan on the unit outside be spinning? I replaced the run capacitor and I believe the other piece is called a definite purpose contactor. What else could it be? My #1 question is which way should the fan on the unit outside be spinning? Thanks for the help.
    April~
    ACTECH's Avatar
    ACTECH Posts: 1, Reputation: 1
    New Member
     
    #2

    Apr 30, 2009, 06:01 PM
    OK, first of all, the fan should be spinning so that the air flows up. Second, the air should be warm if it is in the cooling mode. If the fan is not turning off, then make sure you have it wired on the load side of the contactor. If you have it wired right (refer to schematic), then you may have a bad defrost board if it's a heat pump.
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
     
    #3

    Apr 30, 2009, 06:51 PM

    What brand unit do you have?
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
     
    #4

    Apr 30, 2009, 06:53 PM
    Does the compressor shut off and the fan keep running or the whole thing is still running compressor and fan?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lennox Pulse 21V [ 8 Answers ]

We have a 15 yr old furnace. A Harmony II thermostat for zone control A Lennox digital thermostat for the upstairs,honeywell dial type for the down. We have disconnected the zone control as per our furnace installers directions. While the upstairs digital is set for 72 the furnace...

Lennox G20 with bad BCC [ 3 Answers ]

I have a Lennox G20 which I think has a bad BCC. It is having trouble starting up. It sounds like some of the relays on the board are bad. It is making an odd clicking noise on the board. It is Sometimes it does not ignite the burners and sometimes it does. When the burners do ignite, the fan...

Lennox A/C [ 2 Answers ]

Hello. Our fan is not coming on for our 13ACC unit. We have checked the breakers. Is it possibly a fuse?


View more questions Search