Ask Experts Questions for FREE Help !
Ask
    mammy06's Avatar
    mammy06 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 28, 2009, 09:02 AM
    Whirlpool wiring
    I have a whirlpool dishwasher that mice chewed numerous wires.My son connected all the wires but two or three.I must have the wiring diagram to finish the wiring.It is not behind the kick panel.No one seems to have it.The model number is GU1100XTLB1.
    Flying Blue Eagle's Avatar
    Flying Blue Eagle Posts: 2,056, Reputation: 225
    Ultra Member
    		  
    #2

    Apr 28, 2009, 09:10 PM

    mammy06 - heer are two toll free phone numbers you can contact the whirlpoolcorp> in usa: when you call you will have to ask for the dept> you need <whicjh is for dishwashers:: 1-800-253-1301 or this number 1-877-817-6750
    I hope this helps you out : if i have helped you <please rate my answer in the orange box below have a great day and god bless ::f.b.e.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool wiring [ 2 Answers ]

I have a whirlpool dishwasher that mice chewed numerous wires.My son connected all the wires but two or three.I must have the wiring diagram to finish the wiring.It is not behind the kick panel.No one seems to have it.

Whirlpool Wiring [ 4 Answers ]

I am replacing a whirlpool tub that had a 20amp single pole service. The tub I got needs a power input of 220v/16A It has a 1hp pump and a 220v 1.5kw heater out of the control box on the tub is a wire with a Black,Blue and brown (Line,Earth,Neutral). I think I have to replace the single pole with a...

WIring a whirlpool tub [ 1 Answers ]

Hi , I am in the process of installing a whirlpool tub in my bathroom and I need to run a dedicated circuit to it. I have an unused 220 outlet in my garage that I was hoping to split ad run a line to the whirlpool from. The tub pump is rated at 10.5 amps and there is no inline heater . I was trying...

Wiring Whirlpool Tub [ 6 Answers ]

I'm installing a whirlpool tub in my master bedroom. The elctrical requirement is a dedicated circuit for the pump and a circuit for the heater. Both will need to be GFCI protected. I ran a 12/3 cable thinking I can use a double pole 20 A GFCI breaker. However, I have heard it will not work as...

Whirlpool dryer wiring timer [ 1 Answers ]

We thought we knew with wiring schematics of our timer on our dryer, but not that we are trying to put it back on, we have two wire left not attached to anything. The blue wire coming of the temperature control and the white wire coming off the finishing guard. I really don't know where they...

View more questions Search