Ask Experts Questions for FREE Help !
Ask
    freehealer's Avatar
    freehealer Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 28, 2009, 08:35 AM
    Correct hight of lead toilet flange
    What's the correct hight or exess left out above the floor of lead toilet flange that you need to fold over the bass ring ?

    Thanks
    Hop
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Apr 28, 2009, 08:47 AM
    Quote Originally Posted by freehealer View Post
    What's the correct hight or exess left out above the floor of lead toilet flange that you need to fold over the bass ring ?

    Thanks
    Hop
    Whoa Hoppy! Back the truck up!
    thelead toilet flange that you need to fold over the bass ring
    The lead flare goes down first,(Leave a inch or two folded over on the floor for the flange to set on) then the brass flange that you secure to the floor with screws The closet bolts go in the flange and a wax ring completes the installation. Good luck, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lead toilet flange [ 8 Answers ]

I removed my old toilet to replace it and the old flange was a brass ring and a lead flange bent over the ring the lead flange is connected to a copper waste line. I straightened the lead out carefully and removed the brass ring and replaced some of the floor. Now I want to put a new flange in. ...

Lead toilet flange [ 1 Answers ]

Private Message: lead toilet flange Yesterday, 06:37 PM Redjames New Member Join Date: Mar 2008 Posts: 1 He I saw some of your postings as was wondering if I could ask you a question. I removed my old toilet to replace it and the old flange was a brass ring and a lead flange bent...

Lead Bend Toilet Flange [ 4 Answers ]

I think I have a real problem. In a bathroom remodel the plumbers left a 4" lead bend with about 6 inches above the new floor height. The tiling contractor cut the lead bend even with the floor, (about 1/4 inch above the tile). I gather from other wuestions that I don't have enough lead pipe to...

Replacing a toilet flange with a lead connection [ 6 Answers ]

I am about to pull up my old toilet and take a close look at what's underneath. I am also going to go over the original plank sub-floor with fresh 3/8" ply (followed later with thin lauan for eventual linoleum) there is a visible floor patch from an old repair. Given the fact that there has been a...


View more questions Search