Ask Experts Questions for FREE Help !
Ask
    nate12's Avatar
    nate12 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 28, 2009, 07:06 AM
    Kenmore dryer not heating
    I have a Kenmore 80 series electric dryer that is not heating. I checked the circuit breaker and repluged the dryer, but still no heat. Any ideas, Thanks.
    TerryK's Avatar
    TerryK Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Apr 28, 2009, 07:22 AM
    Does it have a heating coil, if so then it may have fractured and needs to be replaced
    Perito's Avatar
    Perito Posts: 3,139, Reputation: 150
    Ultra Member
    		  
    #3

    Apr 28, 2009, 08:43 AM

    Also check this thread. The same instructions apply.

    https://www.askmehelpdesk.com/applia...at-346230.html
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dryer not heating enough [ 4 Answers ]

My kenmore dryer will start heating, igniter comes on, gas lights and burns for a while. Then the flame stops. After a short while, the igniter comes on again, but no flame starts. I smell no gas. The igniter turns off and the dryer continues to just tumble with no heat. I've cleaned the lint...

Kenmore Dryer not heating [ 3 Answers ]

I have a Kenmore Dryer model 110.73022100 that runs but doesn't heat up. I have replaced the ingnitor, thermostate and thermostate fuse and nothing has helped. I have detached and check the gas line which works fine but there is no ingition of the pilot when the dryer is turned on. Any...

Kenmore Dryer not heating [ 1 Answers ]

I'm working on my mothr in laws 10 yr old kenmore dryer that runs, but the heat element does not get hot. I have taken the element out found no breaks in it, it ohms good. I have 110 volts on both wires to the element. What am I missing ?

View more questions Search