Ask Experts Questions for FREE Help !
Ask
    a302573's Avatar
    a302573 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 8, 2009, 10:29 AM
    Well lost pressure

    My water well has lost pressure, no water is coming out the faucet. What could be wrong
    Fr_Chuck's Avatar
    Fr_Chuck Posts: 81,301, Reputation: 7692
    Expert
    		  
    #2

    Apr 21, 2009, 05:10 PM

    First take time and read the rules and how to post. You posted your "question" twice as a answer to someone as to what was wrong with their air conditioner. So you will never get a answer like that. This does not work like a blog, you have to ask your own question. After that if you want to add to your question, you put it as a answer to your own question

    Thank you
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #3

    Apr 21, 2009, 06:29 PM

    Two questions:

    1. Is the pump above ground or in the well?
    2. Is the pump running?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lost hot water pressure. [ 1 Answers ]

I keep losing the water pressure in my shower when I turn it to hot , why is this?

Pressure lost [ 1 Answers ]

I have a drilled well system. The problem seems to occur after a power outage. I believe water is being used and the pressure in the pressure tank falls below the "cut-in" pressure of the switch and when the power comes back, the switch does not close to activate the well pump. Normally, I would...

Lost water pressure [ 2 Answers ]

Hi. I just replaced mu fitchen faucet and now I have very low cold water pressure in my master bath and laundry room.pressure is so low in tolliet that it won't fill. Help! I am lost

Lost pressure at one sink [ 1 Answers ]

Out of the blue we have lost pressure at one bathroom sink?

Lost pressure to pump [ 1 Answers ]

We have an above ground water pump connected to an underground storage tank. We just had the tank filled, but there is no pressure in the pump. How do we re-prime to get it going again? Chuck

View more questions Search