Ask Experts Questions for FREE Help !
Ask
    pmrowley's Avatar
    pmrowley Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 21, 2009, 10:22 AM
    New contactor isn't labeled with T and L sides; installed either way?
    I have a new 2-pole, 30A, 24v contactor made by Square D to replace an old Honeywell contactor on my Rheem AC. The old contactor is clearly marked with "L" and "T" sides. The new contactor has coil terminals on both sides, and no markings with regard to "L" and "T". In other words, it looks completely symmetrical.

    My assumption is that I can install the new contactor without worrying about orientation; that either end can be "L" or "T", obviously provided I connect the wires to the same ends as before. Am I correct in this assumption?

    Thanks,
    -P
    pmrowley's Avatar
    pmrowley Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Apr 21, 2009, 01:31 PM
    Answer:

    Yes, it worked fine installed!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing RTH6300B with wires that are not labeled [ 2 Answers ]

I am trying to install a programmable thermostat (Honeywell RTH6300B) to replace an existing round Honeywell non-programmable thermostat. The wires on the existing thermostat are not labeled and there are only 2 wires attached (green and yellow). There is a red wire that is taped off. The new...

Thermostat wiring not labeled [ 1 Answers ]

Honeywell mercury thermostat has no wiring labels cooling has 1- blue 1- red 2- yellow heating has 2-yellow 2- white 1- red. Trying to install hunter digital 44860

GE motor wires aren't labeled [ 20 Answers ]

I have an old GE motor I pulled off a planer and want to use on a jointer, but need to switch directions. There is a barely legible wiring diagram on the back side of a cover, but the wires aren't numbered and the current wiring doesn't match up with the diagram. There are 9 wires and I...

Pink pill labeled 'Watson 502' [ 2 Answers ]

What is this pill?

Thermostat wiring color codes not labeled [ 2 Answers ]

In an attempt to install a new thermostat for our heat pump, we failed to label the wires before removing old thermostat. How can we find out how to properly connect wires to the new thermostat. We have Concord outdoor unit (44407H097), Armstrong indoor unit (BCZ36A12A-1B). Our old thermostat is...

View more questions Search