Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Toilet Flushing: tank drains, toilet doesn't flush, brand new toilet.
[ 4 Answers ]
I read the other postings, and most of the problems came in with old toilets. Mine is brand new (within a year old) and I just moved in to my new place. The condo has 2 identical toilets and the other flushes just fine. I have mimicked the settings of the working toilet and still can't get my...
Looking for good Advise on replacing toilet flange on concrete slab to install toilet
[ 26 Answers ]
To whom it may concern: I got a problem with a toilet that has been rocking and twisting for quite some time until it started leaking and what now I pull up the toilet to find out that the flange is broken on one side. I tried that flange plate from home depo but it won't work because the slab is...
Need to replace toilet, rough-in 20" from the wall, toilet has four mounting holes
[ 3 Answers ]
In a nutshell, we need to replace our existing toilet. However, the toilet has a rough-in of about 20"+ to the closet flange and the toilet has four mounting holes on the base. The toilet is connected to the closet flange via the front two holes (and nothing in the back two holes). I bought the...
Aloha Breeze a-rocking
[ 3 Answers ]
Just had Aloha Breeze 52" ceiling fan installed as hugger mount in family room. The part that is rocking back and forth is the area below the blades and inside the main motor housing. There is a single light fixture below that. Wobbling is worse at the higher speed, of course. Installer was...
Rocking Chair
[ 1 Answers ]
I have an old rocking chair that uses wicker material for the back rest and the seat area, this wicker fell apart and I bought more but I don't know how to treated since is hard. Was told to sumerged in warm water and wait until is soft to work with it. Is this correct I'm afraid to do it and... View more questions Search
|