Ask Experts Questions for FREE Help !
Ask
    denman's Avatar
    denman Posts: 48, Reputation: 2
    Junior Member
     
    #1

    Apr 13, 2009, 12:26 PM
    Spa motor won't run
    Replaced the pump on the motor and reinstalled. Have power to hot tub but motor will do nothing, any thoughts? Thanks
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Apr 13, 2009, 12:40 PM

    So did you disconnect the power at all or just pulled the breaker? Can you turn the impellor by hand, maybe its binding.
    rktkdflorida's Avatar
    rktkdflorida Posts: 1, Reputation: 1
    New Member
     
    #3

    Apr 13, 2009, 12:45 PM

    Did you check the overload reset button if so check to see the motor is wired for the correct voltage
    denman's Avatar
    denman Posts: 48, Reputation: 2
    Junior Member
     
    #4

    Apr 13, 2009, 12:52 PM

    Impellor turns freely . Disconneted power at pull bar next to spa. Overload reset button? Not sure where I'd find that
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #5

    Apr 13, 2009, 01:03 PM

    If there is a button it will be on the backside, not the sahft side of the motor. Do you have power at the elctrical connection?
    denman's Avatar
    denman Posts: 48, Reputation: 2
    Junior Member
     
    #6

    Apr 14, 2009, 12:50 PM

    Got motor to run at start up, though need to turn shaft to get it going(capacitor?). When I push button for high speed I have power to lead, but motor does not increase rpm's.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #7

    Apr 14, 2009, 01:35 PM

    I would start with the Capacitor.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

5hp briggs and stratton tiller motor need model # or replacement motor [ 3 Answers ]

I have an earthquake tiller model 5020 with a 5hp briggs and stratton motor that I need to replace but I can not find the model of the motor. Does anyone know which motor replaces that motor or do you know the model number of the motor that was used on that tiller?

Servo motor and step motor [ 2 Answers ]

What is different servo motor with step motor

Difference between Brushless dc motor and Permanent magnet syn motor [ 1 Answers ]

Could anybody tell me the difference as in both case rotor is permant magnet and 3 phase stator winding present

Goodman furnace will ?heat motor? And blower motor will run but not at same time [ 2 Answers ]

I have a 2 year old Goodman, gas, no heat pump. There is a flashing LED that blinks once ever 4 seconds. Also, blower motor does not stay on always. We did smell something like an electrical burn. I'm guess my blower motor is fried?

Benefit of bldc motor compare with pmsm motor or blac motor [ 1 Answers ]

in the name of god hi every body what is benefit of brush less dc motor and brush less ac motor. And when we use bldc and when blac? What is different of them? I know that bldcs have trapezial emf and blacs have sin emf.


View more questions Search