Ask Experts Questions for FREE Help !
Ask
    exnails's Avatar
    exnails Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 11, 2009, 06:47 AM
    Craftsman lawn mower cuts uneven
    I have a craftsman riding mower with 42 in deck and it cuts uneven I have replaced the deck , mandrills, blades ajustment screws basically everything that goes with the deck and have tried every ajustment possibly know to try and get it to cut evenly also I have all four leveling wheels everything, and I cannot get it to cut even it is the left side that cuts lower the side with the bag cuts higher no amount of ajustment the nuts above the deck help in fact there ajustment stripped again anyone have any suggestions? Please Help!
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Apr 11, 2009, 10:38 AM

    Double check recommended tire air pressue on all 4 tires, they must all be the same. The wheels do not regulate cutting depth, they prevent scalping. Are you saying that when you change the deck height adjustments it makes no change in the level of the cut at all, can you make it worse by adjusting the wrong way?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Diagram for replacing lawn mower belt on Sears Craftsman 4000 Riding Mower [ 9 Answers ]

I need a diagram on how to replace a belt on the Sears Craftsman II 4000 riding mower

Lawn mower - Craftsman 6.0 [ 3 Answers ]

My push lawn mower had been running fine until this week. I pull the cord and the lawn mower starts for a second or two and then shuts off. I changed the gas, oil, and airfilter. Not sure what else to do. Looking for any trouble shooting pointers.

Craftsman Lawn Mower will not start [ 2 Answers ]

The lawn mower which was working fine, now will not start. The engine currently will not crank. We have replaced the battery, checked the oil and gas. Appear to be fine. We have checked the safety switch and it appears to be working. What would you recommend as the next thing to check? ...

Craftsman Lawn Mower Won't Start [ 1 Answers ]

My lawn mower (Briggs and stratton 650 series/6.50) just bought 3 months ago won't start. Couple weeks ago I realized I put too much oil and it was smoking all over, reduced the oil and I was able to do my work. Today I tried over and over to start it and it will only kick and stop but the machine...

Craftsman lawn mower [ 1 Answers ]

My father has purchased an old lawn mower for restoration. The model # is 1318430. He thinks it is a Craftsman. Anyone know where to find a picture or details.

View more questions Search