Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Basement washer drain connection to existing floor drain
[ 10 Answers ]
I am on city service. I would like to connect my basement washer drain into the existing floor drain (3" line). I cut the line about 3 feet down from floor trap and installed a 3x2inch y. This existing floor drain takes a 45 turn about 6" down from where I cut it. The 2 inch will drain the washer ....
Basement floor drain
[ 8 Answers ]
Hi, I am having trouble with my basement floor drain running slow and am looking for some advice. I have to assume that the current configuration is a poor design and am willing to redo whatever is necessary to get it right. Currently, the floor drain is a 4" cast iron drain. There is a 1 1/2"...
New floor drain in basement
[ 3 Answers ]
I'm a rookie here and hope to find some information. I am currently finishing my basement (concrete floor) and I'm going to install a steam room. The steam room requires a floor drain and I'm looking to put it about 18" to 24" from the existing ruffed in shower drain in the nearby bathroom. My...
Basement floor drain
[ 6 Answers ]
We have a cast iron basement floor drain with no valve to prevent backflow. Can you put such a valve in an iron pipe and, if so, would I have to go to a plumbing specialty store to get one? The ones at Home Depot are only meant for plastic pipe. If I have to convert to plastic, what is the best...
Basement floor drain
[ 1 Answers ]
My basement floor has no floor drain. I am concerned that if there is a water event like a hot water heater rupture the basement will flood. What is the best way to install a floor drain for the basement? I have busted up some of the slab because I am adding a bathroom in the basement. Have you... View more questions Search
|