Ask Experts Questions for FREE Help !
Ask
    oldgrizzlybear's Avatar
    oldgrizzlybear Posts: 3, Reputation: 1
    New Member
     
    #1

    Apr 7, 2009, 02:00 PM
    Fuel not getting to carburator
    19.5 briggs and stratton on craftsman mower. Original problem of having to put choke on and off due to float sticking. Overhauled carb and vacuum operated fuel pump on front of carb. Has new fuel lines and fuel filter, clear from tank to carb. Fuel pump goes together only one way. Vacuum is correct.fuel cap OK still no fuel going inside carb. Any suggestions
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Apr 8, 2009, 08:53 AM

    Remove the bowl to confirm that the float drops and the needle valve allows fuel to enter the bowl. If the needle is down and there is still no fuel you are back to the vac. How did you confirm that the vac was OK?
    oldgrizzlybear's Avatar
    oldgrizzlybear Posts: 3, Reputation: 1
    New Member
     
    #3

    Apr 8, 2009, 10:06 AM
    Took the top of carb off,new float and valve move freely, talked to B & G hotline,fuel pump overhaul kit that I used was installed properly, they feel that the fuel pump itself(probably the check valve in it)has failed. If we try to blow air from the fuel filter no air enters the carb. Could be the pump decided to quit, strange things happen.
    oldgrizzlybear's Avatar
    oldgrizzlybear Posts: 3, Reputation: 1
    New Member
     
    #4

    Apr 10, 2009, 10:31 AM
    Found problem. We had switched vacuum line and fuel line. According to Briggs and Stratton hotline we were not the 1st to make this goof. Mower runs great now

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Chainsaw carburator fuel line > Poulan 2375 [ 3 Answers ]

I am not sure were the fuel line go to the carburator Poulan 2375

Toro carburator problems ? [ 2 Answers ]

Electric start cranks and makes whirring sound but mower won't turn over.

Craftsman lawnmower carburator being bad [ 1 Answers ]

We have tore this mower apart. Does anybody have a picture of the workings of this stupid thing? It is model#917.272352. At this point any info would be appreciated!!


View more questions Search