Ask Experts Questions for FREE Help !
Ask
    toskill's Avatar
    toskill Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 5, 2009, 11:23 AM
    Gas water heater
    I have a blinking red light on my water heater control panel. I have no hot water. What doest this mean.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    Apr 5, 2009, 12:53 PM

    If you would give us a brand, model number and a serial number we probably could help you better.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #3

    Apr 5, 2009, 03:21 PM

    Try shutting power off to water heater and turn it back on. Do you have the book on the water heater? Other than that we will need the info tellu suggested.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New hot water heater installed, but no hot water pressure. Plenty of cold water? [ 11 Answers ]

Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....

Need help deciding between a tank or tankless water heater [ 19 Answers ]

Which one saves me money; the tankless water heater or conventional tank water heater? :confused:

Power vent water heater verus a direct vent water heater [ 2 Answers ]

I am replacing a leaking 40 gallon reliance gas water heater. The former owner put in a regular (not power or direct vent water heater) illegally. I want to replace the heater with a power vent model but there is no electricity in tbe closet. In addition, if there is a power outage, there will be...

Water heater hookup with sidearm supplimental heater [ 0 Answers ]

Hello: I'm hooking up a sidearm heater to an existing electric water heater for use with an outdoor wood furnace. I've seen diagrams showing the upper port of the potable water side hooked up to the anode port, the TPV port, and the cold water inlet port. My initial thought is that plumbing it into...

Connecting a tankless water heater and separate hot water heater [ 6 Answers ]

What I have is this. An oil fired boiler that generates hot water for my house baseboard heating system. Contained within the boiler is a tankless heater that is heated by way of the firebox in the boiler. The tankless heater is used only for domestic hot water. It has a separate CW supply to the...

View more questions Search