Ask Experts Questions for FREE Help !
Ask
    Bettingm's Avatar
    Bettingm Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 4, 2009, 07:50 AM
    Pocket Door Removal
    Trying to figure out how to remove a newer pocket door for staining. Have removed the top inside trim and can see the roller hardware. Just cannot figure out how to release door from rollers.
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Apr 4, 2009, 08:28 AM

    Hi Bettingm

    The door stop trim on opposite side of where rollers are mounted to door has to be removed. Remove door guide located on pocket side of jamb at floor. Pull bottom of door toward u and lift. This should disengage rollers from track.

    Good luck

    Chuck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Removal of a pocket door [ 8 Answers ]

Does anyone have experience or advice about removing a pocket door? We have a pocket door between our breakfast room and dining room. We recently had porcelain tile installed in both rooms and the pocket door needs to be removed and planned off a little on the bottom because it doesn't quite...

02 Explorer door panel removal [ 1 Answers ]

How do I remove the front door panel on an 02 Explorer

Screwless door knob removal [ 3 Answers ]

Hi, I have a screwless door knob and I can't figure out how to take it apart to fix/replace it. I did a Google search and there were a number of sites telling me to find the small hole and press in the clip and that will open everything. Mine doesn't have that. I just have the two knobs. ...

99 chevy silverado door removal [ 1 Answers ]

How do I remove a door

View more questions Search