Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Copper L pipe to black iron pipe
[ 19 Answers ]
Hello This is a natural gas application. Can flexible L copper pipe be coupled to black iron pipe and then buried? I will paint and wrap the black pipe before burial. Thanks Ruko
Copper pipe to iron pipe
[ 2 Answers ]
How would you connect a 1/2" copper pipe to a 1/2" galvanized iron pipe that has been cut and has no threads? Do I need to re-thread the iron pipe, screw on a brass attachement and solder the other end to the copper? If so, what is the name of the tool use to re-thread the iron?
Washer discharge pipe 7 feet up wall
[ 5 Answers ]
The washer discharge pipe in our rental townhouse is about 7 feet from the floor. We've gone through two washing machines in 2 1/2 months because the washers can't pump the water up that high and something seems to burst in them. Last time the entire basement was flooded. Someone said we could get...
Iron pipe to pvc pipe dilemma
[ 6 Answers ]
This is my problem: I have an ancient rusted 1 1/2" black pipe washing machine drain that came with the house when we bought it. The pipe has a black pipe "Y" fitting on top (don't ask me why) where the washing machine drain hose goes in. Immediately below the "Y" is a 45º ell, connected to the...
Speedball1 - looking for used black iron pipe in Sarasota
[ 6 Answers ]
Hello Speedball1, I ran into your posts here on AskMe by Google searching "iron pipe Sarasota" and I wonder if you might know where I can buy, beg or steal 3" black iron or galvanized pipe near Sarasota, used or otherwise. I am looking for a foot or two of threaded 3" AND 2" iron pipe for... View more questions Search
|